| IGC No. |
Superceded by |
Title |
| IGC 1-91 |
PS 50 |
Dual Flush Devices for Water Closet Tanks |
| IGC 2-91 |
PS 57 |
PVC Hydraulically Actuated Diaphragm Type Water Control Valves |
| IGC 3-91 |
ASME A112.18.3 |
Deck Mounted Hose Connected Kitchen Faucets |
| IGC 4-91 |
PS 52 |
Laundry Tray Holding Tanks and Sewer Ejector Tanks |
| IGC 6-91 |
PS 54 |
Metallic and Plastic Utility Boxes |
| IGC 8-91 |
ASME A112.6.7 |
Enameled Cast Iron Floor Sinks |
| IGC 9-91 |
PS 53 |
Grooved Mechanical Pipe Couplings and Groove End Fittings |
| IGC 10-91 |
PS 55 |
Bath Waste Strainer Drains |
| IGC 11-91 |
NSF 61 |
Materials Data Safety Verification for Toxicity of Plumbing Faucets and Fittings |
| IGC 12-91 |
PS 42 |
Pipe Positioning & Alignment Systems |
| IGC 14-91 |
ASME A112.6.4 |
Plastic Roof Drains |
| IGC 17-91 |
PS 64 |
Pipe Flashing |
| IGC 18-91 |
ASTM F1412 |
Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems |
| IGC 21-91 |
PS 63 |
Plastic Leaching Chamber |
| IGC 23-91 |
ASME A112.6.2 |
Supports for Off-the-Floor Plumbing Fixtures with or without Concealed Tanks |
| IGC 24-91 |
PS 59 |
Septic Effluent and Waste Water Diverter Valves |
| IGC 25-91 |
PS 60 |
Sewage Holding Tank Containing Sewage Ejector Pump for Direct Mounted Water Closet |
| IGC 27-91 |
ASME A112.19.3 |
Fabricated Stainless Steel Security Water Closets |
| IGC 28-91 |
TS 4 |
Pressurized and Non-Pressurized Potable Water Tanks for use in Recreational Vehicles |
| IGC 29-91 |
ASTM F1380 |
Metal Insert Fittings for Polybutylene (PB) Tubing |
| IGC 30-91 |
PS 65 |
Airgap Units for Water Conditioning Equipment |
| IGC -31-92 |
ASTM F1380 |
Metal Insert Fittings for Polybutylene (PB) Tubing |
IGC 32-92 |
Discontinued |
Underwalk Drainage Channel |
| IGC 33-92 |
ASTM C1461 |
Rigid Unshielded Mechanical Couplings for use with Plain End Drain, Waste and Vent (DWV) Pipe and Plain End Sewer Pipe |
| IGC 34-92 |
PS 67 |
Early Closure Flapper for Water Closet Tanks |
| IGC 35-92 |
ANSI Z124.7 |
Gel-Coated FRP Pool Shells |
| IGC 36-92 |
ASME A112.18.6 |
Reinforced Flexible Water Connectors |
| IGC 37-92 |
ASME A112.3.1 |
Performance Standard and Installation Procedures for Stainless Steel Drainage Systems for Sanitary, Storm, and Chemical Applications, Above and Below Ground |
| IGC 38-92 |
TS 33 |
Hose Reels for use in Recreational Vehicles |
| IGC 39-92 |
PS 66 |
Dielectric Waterway Fittings |
| IGC 40-92 |
ASME A112.18.2 |
Field-Fabricated Cable Actuated Bathtub Waste and Overflow Assemblies |
| IGC 41-92 |
PS 76 |
Ballcock or Flushometer Valves Tailpiece Trap Primers and Trap Primer Receptors / Adapters |
| IGC 42-92 |
PS 73 |
Dental Vacuum Pumps |
| IGC 43-92 |
PS 117 |
Press Type Copper Fittings for Installation on Copper Tubing |
| IGC 44-92 |
ASTM C 1440 |
Thermoplastic Elastomeric Gaskets for use in Shielded Hubless and Transition Couplings |
| IGC 45-2006 |
|
Odor Removing Toilet With Ventilation Fan System |
| IGC 46-92 |
ASSE 1055 |
Proportional Chemical Dispensers |
| IGC 47-92 |
ASME A112.19.15 |
Bathtub/Whirlpool Bathtub with Pressure Sealed Doors |
| IGC 48-92 |
PS 72 |
Diaphragm Operated, Plastic Valve with Atmospheric Vacuum Breaker |
| IGC 49-92 |
PS 71 |
Electronic Controlled Showers |
| IGC 50-92 |
PS 81 |
Seepage Pit Covers |
IGC 51-92 |
Discontinued |
Connectors for PE-AL-PE & PEX-AL-PEX Tubing (see IGC 116) |
| IGC 52-92 |
PS 82 |
Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Fittings |
| IGC 53-92 |
ASME A112.19.2 |
Electrohydraulic Water Closets |
| IGC 54-92 |
PS 110 |
PVC Cold Water Compression Fittings |
| IGC 55-92 |
PS 111 |
PVC Cold Water Gripper Fittings |
| IGC 56-92 |
IAPMO/ANSI Z1001 |
Grease Interceptors |
| IGC 57-92 |
PS 87 |
Dial Type Diverter Valves for Pool/Spas |
| IGC 58-92 |
PS 79 |
Multiport Electronic Trap Primer |
| IGC 59-92 |
ASME A112.19.14 |
Dual Flush for Electrohydraulic and Gravity 1.6 Gallon Water Closet |
| IGC 60-92 |
PS 88 |
Pre-Pressurized Potable Water Tank |
| IGC 61-92 |
ASME A112.4.1 |
Water Heater Relief Valve Drain |
| IGC 62-93 |
ASME A112.6.7 |
Epoxy Coated Cast Iron Sanitary Floor Sinks |
| IGC 63-93 |
PS 81 |
Precast Concrete Seepage Pit Liners and Covers |
| IGC 64-93 |
ASME A112.6.7 |
PVC Plastic Sanitary Floor Sinks |
| IGC 65-93 |
ANSI/SAE J-1670 |
Stainless Steel Hose Clamps |
| IGC 66-93 |
PS 54 |
Plastic Utility Boxes (Tub Boxes) |
| IGC 67-2009a |
|
Specialized Miscellaneous Plastic DWV Fittings and Fitting Assemblies |
| IGC 68-93 |
PS 85 |
Tools for Mechanically Formed Tee Connections in Copper Tubing |
| IGC 69-93 |
PS 86 |
Rainwater Valves |
| IGC 70-93 |
ASME A112.19.19 |
Waterless Urinal |
| IGC 71-93 |
PS 93 |
Water Closet Seats with Spray |
| IGC 72-93 |
PS 89 |
Soaking and Hydrotherapy (Whirlpool) Bathtubs with Hydraulic Seatlift |
| IGC 73-93 |
PS 91 |
Plastic Stabilizers for use with Plastic Closet Bends |
| IGC 74-93 |
PS 90 |
Rubber & Elastomeric Test Caps/Cleanout Caps |
| IGC 75-93 |
ASME A112.19.12 |
Wall Hung Moveable Lavatory Systems |
IGC 76-93 |
Discontinued |
Icemakers |
| IGC 77-93 |
PS 92 |
Heat Exchangers |
| IGC 78-02 |
ASME Project |
Drain, Waste and Vent (DWV) Internal Cleanout Fittings |
| IGC 79-98 |
ASME A112.3.4 |
Macerating Systems and Related Components |
| IGC 80-93 |
PS 94 |
P-Trap, Supply Stop & Risers Insulated Protector |
| IGC 81-93 |
ASME A112.18.2 |
Pedestal Lavatory Traps |
| IGC 83-93 |
PS 95 |
Drain, Waste and Vent Hangers |
| IGC 84-93 |
PS 101 |
Suction Relief Valves |
IGC 85-94 |
Discontinued |
Thermal Expansion Relief Valves |
| IGC 86-2002 |
ASME Project |
Passive Solar Water Heaters |
| IGC 87-94 |
PS 95 |
Plastic Hangers |
| IGC 88-94 |
ASTM A 888 |
Mechanical Cast Iron Closet Flanges |
| IGC 89-94 |
PS 98 |
Prefabricated Fiberglass Church Baptisteries |
| IGC 90-94 |
PS 99 |
Terrazzo Plumbing Fixtures |
| IGC 91-2009 |
IAPMO Project |
Electrical or High Density Magnetic Anti-Scale or Water Conditioning Appliance |
IGC 92-94 |
Discontinued |
Polyester Wash Machine/Overflow Base |
| IGC 93-95 |
See IGC 81 |
Pedestal Lavatory Trap |
| IGC 94-95 |
ASME Project |
Neutralizing Sumps for Laboratory and Industrial Waste Systems |
| IGC 95-95 |
PS 100 |
Porous Filter Protector for Sub-Drain Weep Holes |
| IGC 96-95 |
ASSE 1066 |
Individual Pressure Balancing In-Line Valves for Individual Fixture Fittings |
IGC 97-95 |
Discontinued |
Single Port Electronic Trap Primer |
IGC 98-95 |
Discontinued |
Isolation Devices |
| IGC 99-95 |
ANSI LC 3 |
Water Heater Stands with or without Pans |
| IGC 100-98 |
ASME Project |
Copper Wrought Solder-Filled Joint Fittings |
| IGC 101-96 |
CSA US 3-92 |
Excess Flow Valves (A.G.A. Requirements No. 3-92) |
IGC 102-2002 |
Discontinued |
Automatic Shut-Off Systems for Leaking Water Heaters |
| IGC 103-96 |
PS 106 |
Pre-Formed, Tileable Shower Receptors |
| IGC 104-96 |
PS 105 |
Polyethylene Distribution Boxes |
| IGC 105-96 |
PS 104 |
Pressure Relief Connection for Dispensing Equipment |
IGC 106-97 |
Discontinued |
Replacement Tanks with Riser for Two Piece, Close Coupled, Low Consumption (1.6 Gallons) Water Closet |
| IGC 107-97 |
PS 115 |
Hot Water Demand or Automatic Activated Hot Water Pumping System |
| IGC 108-97 |
PS 107 |
Aramid Reinforced Rubber Hose for Use in Non-Potable Water Radiant Heating & Snow Melting |
| IGC 109-2010 |
|
Water Distribution Manifolds for Use with SDR 9 PEX Tubing, PE-AL-PE, and PEX-AL-PEX Composite Piping |
| IGC 110-97 |
PS 51 |
Metallic Expansion Joints for Use in Vertical Drain, Waste, and Vent (DWV) Systems |
IGC 111-2005 |
ASME A112.19.12 |
Adjustable Position Sink, or Elevating Sink, Lavatory and Shampoo Bowl |
| IGC 112-97 |
|
Household Food Waste Disposers with an Integral Additive Injection System |
| IGC 113-97 |
PS 108 |
Restaurant Fire Suppression Systems |
| IGC 114-97 |
PS 95 |
Plastic J-Hooks |
| IGC 115-2009 |
ASME Project |
Automatic Water Leak Detection and Control Systems |
| IGC 116-99 |
ASTM F 1974 |
Metal Insert Fittings for Polyethylene/ Aluminum/ Polyethylene and Crosslinked Poylethylene/ Aluminum/ Crosslinked Polyethylene Composite Pressure Pipe |
| IGC 117-97 |
ASME Project |
Water Closet Riser Assemblies |
| IGC 118-97 |
ASME A112.14.6 |
Flushing Siphons for Water Closet Tanks |
| IGC 119-97 |
ASME Project |
Water Treatment Equipment Drain Connectors |
| IGC 120-98a |
ASME Project |
Elastomeric Gasketed and Rubber-Ring Joint Fittings for Hot and Cold Water Distribution Systems |
| IGC 121-98a |
PS 112 |
PVC Plastic Valves for Cold Water Distribution Systems Outside a Building and CPVC Plastic Valves for Hot and Cold Water Distribution Systems |
| IGC 122-2005a |
|
Test Caps and Test Gates with ABS (Acrylonitrile-Butadiene-Styrene) or PVC (Poly Vinyl Chloride) Housings |
| IGC 123-2008 |
ASME Project |
Solenoid Type Water Control Valve |
| IGC 124-2000 |
ASME Project |
Point-of-Use and Branch Water Sub-Metering Systems |
| IGC 125-98 |
ASME A112.14.6 |
FOG (Fats, Oils & Greases) Disposal Systems |
| IGC 126-99 |
|
Non-Mechanical Waste and Overflow Devices |
| IGC 127-2009 |
|
Combined Hand Washer/Dryer with Integral Soap Dispenser With or Without a Lavatory |
| IGC 128-2008 |
ASME Project |
Water Heater Supply Shutoff Valve with a Thermal Expansion Control Valve |
| IGC 129-98a |
PS 113 |
Hydraulically Powered Household Food Waste Disposers |
| IGC 130-99 |
PS 114 |
Remote Floor Box Industrial Water Supply, Air Supply, Drainage |
IGC 131-98 |
Discontinued |
Automatic Self-Disinfecting Commercial Water Closet |
| IGC 132-2002a |
ASME Project |
Vacuum Toilet Systems for Recreational Vehicles |
| IGC 133-98 |
PS 116 |
Hot Water Circulating Devices Which Do Not Use a Pump |
IGC 134-98 |
PS 120 |
Flashing and Stand Combination for Residential Air Conditioning Units (Residential Curb Unit) (Sept. 2004 SRC) |
IGC 135-98 |
ASTM F 876 |
Cross-Linked Polyethylene (PEX) Tubing Sizes from 2-1/2 Inches (63 mm) Through 4 Inches (110 mm) (June 2005 SRC) |
| IGC 137-99a |
PS 117 |
Press Type Copper Fittings for Installation on Copper Tubing |
| IGC 138-99 |
|
Air Gap Drains for Commercial Kitchen Sinks |
| IGC 139-99 |
|
Performance of Automatic Grease/Oil Removal Devices with Automatic Solids Transfer Feature (GRD-AST) |
IGC 140-99a |
PS 119 |
Water Energized Sump Pump (March 2004 SRC) |
| IGC 141-2008 |
|
Aquatic Therapy Pools |
| IGC 142-99 |
|
Whirlpool Bathtubs with Water Fill Through the Whirlpool Piping System |
| IGC 143-2000 |
|
Sanitary Flooring System |
IGC 144-2001a |
ASSE 1072 |
Floor Drain Gas Traps (Dec. 2007 SRC) |
IGC 145-99 * |
Discontinued |
Brass Valves and Fittings with Ring Joint Connection |
IGC 146-2002 |
ASME A112.6.3 |
Floor and General Purpose Drains with Metal, ABS, and PVC Components (Dec. 2005 SRC) |
| IGC 147-99 |
|
Flexible Elastomeric Mechanical Fittings for Use With Plain End Drain, Waste, and Vent (DWV) and Plain End Sewer (Tubular Waste) Pipe |
| IGC 148-99 |
|
Cast In Place Polyethylene Low Pressure Pipe Seals for OEM Septic Tank and Distribution Box Applications |
| IGC 149-99 |
|
Performance of Engineering Thermoplastics Materials (Injection Molding and Extrusion Grades) Suitable for Kitchen and Bath Applications (Type I and III Materials Only) |
| IGC 150-2009 |
|
Vacuum Sewage,Grease Waste and/or Condensate Collection Systems |
| IGC 151-99 |
|
HDPE Plastic Valves for Cold Water Distribution Systems Outside a Building |
| IGC 152-99 |
|
In-Line Sanitary Conditioning Systems for Flushometer Valve Operated Fixtures |
IGC 153-2000 * |
Discontinued |
Plastic Drainage Panels |
| IGC 154-2009 |
|
Tub/Shower Enclosures and Shower Panel Assemblies |
| IGC 155-2008 |
|
Pipeless Whirlpool Bathtub Appliances |
| IGC 156-2009 |
|
Wash Fountains and Lavatory Systems With or Without Water Closet |
| IGC 157-2009a |
|
Ball Valves |
| IGC 158-2000 |
|
Fiberglass Reinforced Plastic Pool Shells |
| IGC 159-2000a |
|
Zero Waste Water Reverse Osmosis Systems and Zero Waste Retrofit Kits for Reverse Osmosis Systems |
| IGC 160-2002a |
ASME A112.19.17 |
Safety Vacuum Release System (SVRS) Devices for Residential and Commercial Swimming Pool, Spa, Hot Tub, and Whirlpool Suction Systems |
| IGC 161-2009 |
|
Waterless Urinals with a Mechanical Trap |
| IGC 162-2000 |
|
Special Fitting with Strainer for Water Closet Fill Valve |
| IGC 163-2001r1 |
|
Freeze Protection Valve |
| IGC 164-2003 |
|
Dual Containment Piping Systems for Acid Waste and Special Waste Applications |
| IGC 165-2001e1 |
ASME A112.4.3 |
ABS (Acrylonitrile-Butadiene-Styrene) or PVC (Poly Vinyl Chloride) Combination Plastic Toilet Fitting and Flange for Connecting Water Closet to the Drainage System |
| IGC 166-2001e1 |
|
Plastic DWV to Sewer Adapter Fittings |
| IGC 167-2009 |
|
Solid Waste Containment Plumbing Interceptors |
| IGC 168-2001 |
|
Supply Stops with Integral Water Hammer Arresters |
| IGC 169-2002 |
|
Combinations Residential Dishwasher/Sink Units |
| IGC 170-2002r1 |
|
Relief Valve for Use on Backflow Preventers |
| IGC 171-2007 |
|
Air Jetted Laundry Tub |
| IGC 172-2010 |
|
Glass Lavatories, Sinks and Counter Tops |
| IGC 173-2002 |
|
PVC-DWV Fire Stop Fittings |
| IGC 174-2002 |
|
Shower Arm Adapter Which Allows Connection of the Shower Arm Assembly to be made to CTS Tube Outside of the Finished Wall |
| IGC 175-2003 |
|
One Time Use Water Heater Emergency Shut-Off Devices |
| IGC 176-2002 |
|
Compression Fittings for PEX-AL-PEX Tubing |
| IGC 177-2002 |
|
Water Closets with Automatic Seat and Automatic Seat Cover Dispenser |
| IGC 178-2002 |
|
Gravity Fed Water Distribution Manifolds for Trap Primers |
| IGC 179-2002 |
|
Water Mixing Systems for Emergency Showers and Eyewashes |
| IGC 180-2003 |
|
Aerobic Bacterial Generator for Insert into Septic Tanks, Grease Interceptors and Grease Traps |
| IGC 181-2009 |
|
Combination Fill Valve and Hydraulic Actuated Flush Valve for Gravity Type Water Closets |
| IGC 182-2003 |
|
Automatic Hair Washers |
| IGC 183-2008 |
|
Oil/Water Seperators and Coalescing Plate Seperators |
| IGC 184-2003a |
|
Cooper Tubing FPT Outlets for Supply Stop Valves |
| IGC 185-2003 |
|
Continuous Ribbed (Unitary Extruded Dual Containment Piping Systems for Acid Waste and Special Waste Applications) |
| IGC 186-2004a |
|
Bathroom Accessories |
| IGC 187-2009 |
|
Roof Drains with Integral Overflow Drain or Air Vent |
| IGC 188-2009 |
ASSE 1061 |
Removable and Non-Removable Push Fit Fittings(Recognized in Canada) |
| IGC 189-2008 |
|
Internal Pipe Epoxy Barrier Coating Material for Application in Pressurized (Closed) Water Piping Systems |
| IGC 190-2003 |
|
Air-Base Solar Thermal Collector |
| IGC 191-2003 |
|
Grade Level Yard Hydrant and Hose Storage Chamber |
| IGC 192-2004 |
|
Plastic Acrylontrile-Butadiene Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Drain, Waste and Vent (DWV) Pressure Test Fittings for Use in ABS, PVC or Cast Iron DWV Piping Systems |
| IGC 193-2006 |
|
Safety Plates and Plate Straps |
| IGC 194-2004a |
|
Copper Alloy and Aluminum Alloy Sinks and Lavatories |
| IGC 195-2009 |
|
Floor Drain with Integrated Bonding Flange |
| IGC 196-2003 |
|
Condensate Traps and Overflow Switches as Used in Central Air Conditioning Systems |
| IGC 197-2004 |
|
Mounting Brackets for Single Handle Tub/Shower Valves |
| IGC 198-2004 |
|
Elastomeric Elbows and Tees for Above Ground Non-Pressure DWV Repair Applications |
| IGC 199-2004 |
|
Drain Rock Replacement Materials Used in Septic Leach Disposal Systems |
| IGC 200-2004 |
|
Thermoset Wash Machine/Overflow Base |
| IGC 201-2004 |
|
Polyethylene Sleeved-Corrugated Stainless Steel Tubing for Use in Fuel Gas Piping System |
| IGC 202-2004a |
|
Bracing Systems for Water Heaters to Wood Studs |
IGC 203-2004 |
ASME A112.18.8 |
Self Sealing Waterless Waste Valve (Dec. 2009 SRC) |
| IGC 204-2004 |
|
Rupture Prevention Devices for Wall Hydrants |
| IGC 205-2005 |
|
ABS or PVC Piping Systems Intended for Limited Chemical Waste Drainage System |
| IGC 206-2004 |
|
Emergency Shut Off Device for Non Potable Water Systems |
| IGC 207-2009a |
|
Reclaimed Water Conservation System For Flushing Toilets |
| IGC 208-2005a |
|
Drain Tailpiece-Insert |
| IGC 209-2008 |
|
Odor Removing Air Filters for Terminal Vent Pipes |
| IGC 210-2005a |
|
Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Limited Chemical Waste Drainage Systems |
| IGC 211-2005 |
|
Flexible Water Connectors with Excess Flow Shutoff Device |
| IGC 212-2009a |
|
Factory Applied Aluminum and Polyethylene or Crosslinked Polyethylene Coated SDR9 PEX Tubing |
| IGC 213-2005 |
|
Closed-Loop Biological Wastewater System |
| IGC 214-2009 |
|
In-Line Devices for Downspout Filtration |
| IGC 215-2005b |
|
Solderless Bonding Adhesive for Copper Piping Water Systems |
| IGC 216-2005 |
|
Freeze Free Faucet |
| IGC 217-2007 |
|
Metallic Bathtubs, Shower Pans and Whirlpool Bathtubs |
| IGC 218-2005 |
|
Sink Outlet Dual Screening Device |
| IGC 219-2005 |
|
Vertical Leaching Systems |
| IGC 220-2006 |
|
Breathing Air Replenishments Systems (BARS) |
| IGC 221-2005 |
|
Solvent Cement for Chlorinated Poly (Vinyl Chloride)(CPVC) Pipe and Fittings for Limited Chemical Waste Drainage Systems |
| IGC 222-2005 |
|
Water Closet Seat Lifter |
| IGC 223-2007 |
|
Prolypropylene-Aluminum-Polypropylene Multilayer Piping Systems for Hot and Cold Water |
| IGC 224-2009 |
|
ABS, PVC and Cast Iron DWV Test Fitting with Integral Cleanout |
| IGC 225-2006 |
|
Lavatory or Sink Trap With or Without Removable Filter or Cleaning Device |
| IGC 226-2006a |
|
Drinking Water Fountains With or Without Chiller or Heater |
| IGC 227-2006 |
|
Bathtubs with Over the-Rim Overflow Drain Receptor |
| IGC 228-2006 |
|
Polyethylene of Raised Temperature (PE-RT) Tubing |
| IGC 229-2006 |
|
Vertical PVC Backwater Preventors |
| IGC 230-2006 |
|
Manually Operated Water Softener Bypass Valves |
| IGC 231-2006 |
|
Factory Assembled Septic Tank Kits |
| IGC 232-2006 |
|
PVC Valve with Integral Ball and Spring-Check or Swing-Check Features |
| IGC 233-2009 |
|
Corrugated Stainless Steel Hot-and Cold-Water Distribution Systems |
| IGC 234-2006 |
|
Demand Driven Storm Water Diversions System |
| IGC 235-2009 |
|
Wood Type Plumbing Fixtures |
| IGC 236-2006 |
|
Closet Flange Extender |
| IGC 237-2006 |
|
High Pressure Stainless Steel Shielded Couplings for use with Hubless Cast Iron Soil Pipe and Fittings |
| IGC 238-2007 |
|
Bio Hazard Disposal Device |
| IGC 239-2007 |
|
Aluminum-Polypropylene Multilayer Piping Systems for Hot- and Cold- Water |
| IGC 240-2007 |
|
Load Pads for Air Conditioning Units |
| IGC 241-2008a |
|
Water Flow Shut-Off Devices |
| IGC 242-2007 |
|
Polypropylene Inspection Chambers (PPIC) |
| IGC 243-2007 |
|
Chlorinated Poly (Vinyl Chloride)-Aluminum-Chlorinated Poly (Vinyl Chloride) (CPVC-AL-CPVC) Tubing and Fittings |
| IGC 244-2007a |
|
Flow Shutoff Device With or Without Shower Head |
| IGC 245-2007a |
|
Wastewater Interceptor System (WIS) for an Interactive Mechanical Wastewater Interceptor |
| IGC 246-2007 |
|
Grease Traps with Outer Retention |
| IGC 247-2007 |
|
Water Closet with Mechanical Trap |
| IGC 248-2007 |
|
Odor Removing Device for Water Closets |
| IGC 249-2007 |
|
Floor Drain with Intergrated Closet Flange |
| IGC 250-2007 |
|
Diverter Valve for Rainwater Tank |
| IGC 251-2008 |
|
Structural Adhesive Fitting Systems for Joining PVC, CPVC, ABS, PP, PE, PEX, and Copper Tubing |
| IGC 252-2008 |
|
Water Closet With An Overflow |
| IGC 253-2008a |
|
Malleable Cast Iron Fittings with Mechanical Press Connections for Steel Pipe |
IGC 254-2008a |
|
Stainless Steel Industrial/Commercial Sinks (March 2009 SRC) |
| IGC 255-2009 |
|
Water Closet with Itegral Rinse Station |
| IGC 256-2008 |
|
Residential Sinks with Intergrated Rinsing Outlets |
| IGC 257-2009a |
|
Hinge Type Couplings Used for Joining Hubless Cast Iron Soil Pipe Fittings |
| IGC 258-2008 |
|
Low Flow Laundry Faucet |
| IGC 259-2008 |
|
Drainage Line Backup Detection Device |
| IGC 260-2009 |
|
Whirlpool Bathtub with Pressure Sealed Door and Optional Reservoir/Waste Tank(s) |
| IGC 261-2008 |
|
Supply Stop with Excess Flow Shutoff Device |
| IGC 262-2008 |
|
Multi-Layed Corrugated Polyethylene (PE) Tank |
| IGC 263-2008 |
|
Roof Drain Receiver |
| IGC 264-2008 |
|
Pivoting Water Closet With or Without Cabinet and Lavatory |
| IGC 265-2008 |
|
PVC Reinforcement Ring for PVC DWV Joints |
| IGC 266-2010 |
|
Polyethylene of Raised Temperature Multilayer Piping Systems for Hot-and Cold-Water |
| IGC 267-2009 |
|
Wall Hydrants with Alternate End Connections |
| IGC 268-2009 |
|
Copper Alloy Left/Right Threaded Connectors |
| IGC 269-2009 |
|
PVC or ABS Cover for Use with Unshielded Flexible Transition Couplings for Underground Piping Systems |
| IGC 270-2008 |
|
Longitudinally Welded Hot-Dip Galvanized Steel Pipe and Fittings for Wastewater Systems |
| IGC 271-2009 |
|
Flow Regulating Device |
| IGC 272-2009 |
|
Commercial Faucet with Integral Emergency Eye Wash Unit |
| IGC 273-2009 |
|
Hydromechanical Grease Interceptors Rated Over 100 GPM |
| IGC 274-2009 |
|
Whirlpool Bathtub with Pressure Sealed Door and Drainage Tank |