| Standard |
Title |
| IAPMO PS 1-2007 |
Tank Risers |
IAPMO PS 4-2005 |
Drains for Prefabricated and Precast Showers(Nov. 2005 SRC meeting) |
IAPMO PS 14-2002 |
Flexible Metallic Field Fabricated Water Connectors (July 2002) |
IAPMO PS 16-2004a |
Subdrains For built Up Shower Pans
|
| IAPMO PS 23-2006a |
Dishwasher Drain Airgaps |
| IAPMO PS 25-2002 |
Metallic Fittings for Joining Polyethylene Pipe For Water Service and Yard Piping |
IAPMO PS 31-1995 |
Backflow Prevention Assemblies (Dec 2004 SRC meeting) |
| IAPMO PS 33-2011 |
Flexible PVC Hose for Pools, Hot Tubs, Spas and Jetted Bathtub |
| IAPMO PS 34-2003 |
Polyethylene Encasement Sleeve for Potable Water Pipe and Tubing |
| IAPMO PS 36-1990 |
Lead Free Sealing Compounds for Threaded Joints |
| IAPMO PS 37-1990 |
Black Plastic PVC or PE Pressure-Sensitive Corrosion Preventative Tape |
IAPMO PS 38-1999 |
ABS AND PVC Backwater Valves (Aug. 2004 SRC meeting) |
IAPMO PS 40-2001 |
Anodeless Transition Riser for use with Polyethylene and PVC Gas Yard Piping (April 2005 SRC meeting) |
IAPMO PS 41-2002 |
Copper and Other Metallic Roof/Deck/Balcony Drains (Aug 2004 SRC meeting) |
| IAPMO PS 42-1996 |
Pipe Alignment & Secondary Support Systems |
|
IAPMO PS 43-2007
|
Cushioned Bathtubs and Whirlpool Bathtub Appliances |
| IAPMO PS 46-2010 |
Field Fabricated Tiling Kits |
IAPMO PS 47-2002e1 |
Plastic Rook Drains (Aug 2004 SRC meeting) |
IAPMO PS 49-2002 |
Backflow Prevention Requirements for Fixture Fittings with Hose Connected Singular moveable Outlets (April 2005 SRC meeting) |
| IAPMO PS 50-2010 |
Flush Valves with Dual Flush Device for Water Closets or Water Closet Tank with an Integral Flush Valves with a Dual Flush Device |
| IAPMO PS 51-1998 |
Plastic and Metallic Expansion Joints |
| IAPMO PS 52-2009 |
Pump/Dose, Sumps and Sewage Ejector Tanks With or Without a Pump |
| IAPMO PS 53-2008 |
Grooved Mechanical Pipe Couplings and Grooved End Fittings |
| IAPMO PS 54-2011 |
Metallic and Plastic Utility Boxes |
| IAPMO PS 55-1992 |
Bathwaste Strainer Drains |
| IAPMO PS 57-2002 |
PVC Hydraulically Actuated Diaphragm Type Water Control Valves |
IAPMO PS 58-1992 |
Supports for Off-The-Floor Plumbing Fixtures with or without Concealed Tanks |
| IAPMO PS 59-2010 |
Septic Effluent and Waste Water Diverter Valves or Diversion System |
| IAPMO PS 60-1996 |
Sewage Holding Tank Containing Sewage Ejector Pump for Direct Mounted Water Closet |
IAPMO PS 61-2006a |
Fabricated Stainless Steel Water Closets or Urinals (March 2009 SRC Meeting) |
| IAPMO PS 63-2005 |
Plastic Leaching Chambers |
| IAPMO PS 64-2007a |
Pipe Flashings |
| IAPMO PS 65-2002 |
Airgap Units for Water Conditioning Equipment Installation |
| IAPMO PS 66-2000 |
Dielectric Waterway Fittings |
| IAPMO PS 67-2010 |
Early-Closure Replacement Flappers or Early-Closure Replacement Flapper with Mechanical Assemblies |
| IAPMO PS 69-2006 |
Bathwaste and Overflow Assemblies with Tub Filler Spout |
| IAPMO PS 71-2002 |
Electronic Controlled Showers |
| IAPMO PS 72-2007 |
Valves with Atmospheric Vacuum Breakers |
| IAPMO PS 73-1993 |
Dental Vacuum Pumps |
| IAPMO PS 76-1995 |
Ballcock or Flushometer Valve Tailpiece Trap Primers and Trap Primer Receptors / Adaptors |
| IAPMO PS 79-2005 |
Multiport Electronic Trap Primer |
| IAPMO PS 80-2008 |
Clarifiers |
| IAPMO PS 81-2006 |
Precast Concrete Seepage Pit Liners and Covers |
| IAPMO PS 82-1995 |
Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Fittings |
| IAPMO PS 85-1995 |
Tools for Mechanically Formed Tee Connections in Copper Tubing |
| IAPMO PS 86-1995 |
Rainwater Diverter Valve for Non-Roofed Area Slabs |
| IAPMO PS 87-1995 |
Diverter and Shut-off Valves for Pool/Spas |
| IAPMO PS 88-2011 |
Pre-Pressurized Potable Water Tanks or Expansion Tanks |
| IAPMO PS 89-1995 |
Soaking and Hydrotherapy (Whirlpool) Bathtubs with Hydraulic Seatlift |
| IAPMO PS 90-2006 |
Elastomeric Test Caps/Cleanout Caps |
| IAPMO PS 91-2005a |
Plastic Stabilizers for Use with Plastic Closet Bends |
| IAPMO PS 92-2010 |
Heat Exchangers and Indirect Water Heaters |
IAPMO PS 93-2004a |
Water Closets with Spray, Water Closet Seats with Spray and Other Devices with Spray for Water Closet Supplied with Hot and Cold Water (Oct. 2009 SRC meeting)
|
| IAPMO PS 94-2008 |
P-Trap, Supply Stop and Riser Insulated Protector |
| IAPMO PS 95-2001 |
Drain, Waste, and Vent Hangers and Plastic Pipe Support Hooks |
| IAPMO PS 96-2002 |
Passive Direct Solar Water Heaters |
| IAPMO PS 97-2011 |
Mechanical Cast Iron Closet Flanges (Reinstated May 2011 SRC Meeting) |
| IAPMO PS 98-1996 |
Prefabricated Fiberglass Church Baptisteries |
|
IAPMO PS 99-2007 |
Terrazzo, Marble, Concrete, Slate, and Granite Plumbing Fixtures |
| IAPMO PS 100-1996 |
Porous Filter Protector for Sub-Drain Weep Holes |
| IAPMO PS 101-1997 |
Suction Relief Valves |
IAPMO PS 102-2005 |
Pedestal Lavatory Trap (June 2005 SRC meeting) |
IAPMO PS 103-1997 |
Water Heater Stands With or Without Pans |
| IAPMO PS 104-1997 |
Pressure Relief Connection for Dispensing Equipment |
| IAPMO PS 105-1997 |
Polyethylene Distribution Boxes |
| IAPMO PS 106-2010 |
Pre-Fabricated, Tileable Shower Receptors |
| IAPMO PS 107-1998 |
Aramid Reinforced Rubber Hose for Use in Non-Potable Water Radiant Heating and Snowmelting |
| IAPMO PS 108-1998 |
Grease Fire Suppression Systems |
IAPMO PS 109-2003 |
Rigid Unshielded Mechanical Couplings for use Plain end Drain, Waste, and Vent (DWV) Pipe and Plain End Sewer Pipe (July 2005 SRC meeting) |
| IAPMO PS 110-2006a |
PVC Cold Water Compression Fittings |
| IAPMO PS 111-1999 |
PVC Cold Water Gripper Fittings |
| IAPMO PS 112-1999 |
PVC Plastic Valves For Cold Water Distribution Systems Outside a Building and CPVC Plastic Valves For Hot and Cold Water Distribution Systems |
| IAPMO PS 113-2010 |
Hydraulically Powered Household Food Waste Disposers |
| IAPMO PS 114-1999e1 |
Remote Floor Box Industrial Water Supply, Air Supply, Drainage |
| IAPMO PS 115-2007 |
Hot Water On-Demand or Automatic Activated Hot Water Pumping Systems |
| IAPMO PS 116-1999 |
Hot Water Circulating Devices Which Do not Use a Pump |
| IAPMO PS 117-2008 |
Copper and Copper Alloy Tubing System Incorporating Press-Type or Nail-Type Connections |
IAPMO PS 118-2005 |
Fog (Fats, Oils & Greases) Disposal Systems (Sept 2006 SRC Meeting) |
| IAPMO PS 119-2006 |
Water Energized Sump Pump |
| IAPMO PS 120-2004 |
Flashing and Stand Combination for Air Conditioning Units (Res/Comm Unit Curb) |
| IAPMO SPS 3-1993 |
Skimmers (Spas, Hot Tubs and Swimming Pools) |
| IAPMO SPS 4-2009 |
Special Use Suction Fittings for Swimming Pools, Spas and Hot Tubs (For Suctions Side Automatic Swimming Pool Cleaners) |
| IAPMO SPS 5-2006 |
Water or Air Jet Fittings |