Designation | Title |
---|---|
IGC 1 | Dual Flush Devices for Water Closet Tanks |
IGC 2 | PVC Hydraulically Actuated Diaphragm Type Water Control Valves |
IGC 3 | Deck Mounted Hose Connected Kitchen Faucets |
IGC 4 | Laundry Tray Holding Tanks and Sewer Ejector Tanks |
IGC 5 | Brass Cleanouts |
IGC 6 | Metallic and Plastic Utility Boxes |
IGC 8 | Enameled Cast Iron Floor Sinks |
IGC 9 | Grooved Mechanical Pipe Couplings and Groove End Fittings |
IGC 10 | Bath Waste Strainer Drains |
IGC 11 | Materials Data Safety Verification for Toxicity of Plumbing Faucets and Fittings |
IGC 12 | Pipe Positioning & Alignment Systems |
IGC 14 | Plastic Roof Drains |
IGC 17 | Pipe Flashing |
IGC 18 | Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems |
IGC 21 | Plastic Leaching Chambers |
IGC 23 | Supports for Off-the-Floor Plumbing Fixtures with or without Concealed Tanks |
IGC 24 | Septic Effluent and Waste Water Diverter Valves |
IGC 25 | Sewage Holding Tank Containing Sewage Ejector Pump for Direct Mounted Water Closet |
IGC 27 | Fabricated Stainless Steel Security Water Closets |
IGC 28 | Pressurized and Non-Pressurized Potable Water Tanks for use in Recreational Vehicles |
IGC 29 | Metal Insert Fittings for Polybutylene (PB) Tubing |
IGC 30 | Airgap Units for Water Conditioning Equipment |
IGC 31 | Metal Insert Fittings for Polybutylene (PB) Tubing |
IGC 32 | Underwalk Drainage Channel |
IGC 33 | Rigid Unshielded Mechanical Couplings for use with Plain End Drain, Waste and Vent (DWV) Pipe and Plain End Sewer Pipe |
IGC 34 | Early Closure Flapper for Water Closet Tanks |
IGC 35 | Gel-Coated FRP Pool Shells |
IGC 36 | Reinforced Flexible Water Connectors |
IGC 37 | Performance Standard and Installation Procedures for Stainless Steel Drainage Systems for Sanitary, Storm, and Chemical Applications, Above and Below Ground |
IGC 38 | Hose Reels for use in Recreational Vehicles |
IGC 39 | Dielectric Waterway Fittings |
IGC 40 | Field-Fabricated Cable Actuated Bathtub Waste and Overflow Assemblies |
IGC 41 | Ballcock or Flushometer Valves Tailpiece Trap Primers and Trap Primer Receptors / Adapters |
IGC 42 | Dental Vacuum Pumps |
IGC 43 | Press Type Copper Fittings for Installation on Copper Tubing |
IGC 44 | Thermoplastic Elastomeric Gaskets for use in Shielded Hubless and Transition Couplings |
IGC 45 | Odor Removing Toilet with Ventilation Fan System |
IGC 46 | Proportional Chemical Dispensers |
IGC 47 | Bathtub/Whirlpool Bathtub with Pressure Sealed Doors |
IGC 48 | Diaphragm Operated, Plastic Valve with Atmospheric Vacuum Breaker |
IGC 49 | Electronic Controlled Showers |
IGC 50 | Seepage Pit Covers |
IGC 51 | Connectors for PE-AL-PE & PEX-AL-PEX Tubing |
IGC 52 | Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Fittings |
IGC 53 | Electrohydraulic Water Closets |
IGC 54 | PVC Cold Water Compression Fittings |
IGC 55 | PVC Cold Water Gripper Fittings |
IGC 56 | Grease Interceptors |
IGC 57 | Dial Type Diverter Valves for Pool/Spas |
IGC 58 | Multiport Electronic Trap Primer |
IGC 59 | Dual Flush for Electrohydraulic and Gravity 1.6 Gallon Water Closet |
IGC 60 | Pre-Pressurized Potable Water Tank |
IGC 61 | Water Heater Relief Valve Drain |
IGC 62 | Epoxy Coated Cast Iron Sanitary Floor Sinks |
IGC 63 | Precast Concrete Seepage Pit Liners and Covers |
IGC 64 | PVC Plastic Sanitary Flo+D134r Sinks |
IGC 65 | Stainless Steel Hose Clamps |
IGC 66 | Plastic Utility Boxes (Tub Boxes) |
IGC 68 | Tools for Mechanically Formed Tee Connections in Copper Tubing |
IGC 69 | Rainwater Valves |
IGC 70 | Waterless Urinal |
IGC 71 | Water Closet Seats with Spray |
IGC 72 | Soaking and Hydrotherapy (Whirlpool) Bathtubs with Hydraulic Seatlift |
IGC 73 | Plastic Stabilizers for use with Plastic Closet Bends |
IGC 74 | Rubber & Elastomeric Test Caps/Cleanout Caps |
IGC 75 | Wall Hung Moveable Lavatory Systems |
IGC 76 | Icemakers |
IGC 77 | Heat Exchangers |
IGC 79 | Macerating Systems and Related Components |
IGC 80 | P-Trap, Supply Stop & Risers Insulated Protector |
IGC 81 | Pedestal Lavatory Traps |
IGC 83 | Drain, Waste and Vent Hangers |
IGC 84 | Suction Relief Valves |
IGC 85 | Thermal Expansion Relief Valves |
IGC 86 | Passive Solar Water Heaters |
IGC 87 | Plastic Hangers |
IGC 88 | Mechanical Cast Iron Closet Flanges |
IGC 89 | Prefabricated Fiberglass Church Baptisteries |
IGC 90 | Terrazzo Plumbing Fixtures |
IGC 92 | Polyester Wash Machine/Overflow Base |
IGC 93 | Pedestal Lavatory Trap |
IGC 94 | Neutralizing Sumps for Laboratory and Industrial Waste Systems |
IGC 95 | Porous Filter Protector for Sub-Drain Weep Holes |
IGC 96 | Individual Pressure Balancing In-Line Valves for Individual Fixture Fittings |
IGC 97 | Single Port Electronic Trap Primer |
IGC 98 | Isolation Devices |
IGC 99 | Water Heater Stands with or without Pans |
IGC 101 | Excess Flow Valves (A.G.A. Requirements No. 3-92) |
IGC 102 | Automatic Shut-Off Systems for Leaking Water Heaters |
IGC 103 | Pre-Formed, Tileable Shower Receptors |
IGC 104 | Polyethylene Distribution Boxes |
IGC 105 | Pressure Relief Connection for Dispensing Equipment |
IGC 106 | Replacement Tanks with Riser for Two Piece, Close Coupled, Low Consumption (1.6 Gallons) Water Closet |
IGC 107 | Hot Water Demand or Automatic Activated Hot Water Pumping System |
IGC 108 | Aramid Reinforced Rubber Hose for Use in Non-Potable Water Radiant Heating & Snow Melting |
IGC 110 | Metallic Expansion Joints for Use in Vertical Drain, Waste, and Vent (DWV) Systems |
IGC 111 | Adjustable Position Sink, or Elevating Sink, Lavatory and Shampoo Bowl |
IGC 112 | Household Food Waste Disposers with an Integral Additive Injection System |
IGC 113 | Restaurant Fire Suppression Systems |
IGC 114 | Plastic J-Hooks |
IGC 116 | Metal Insert Fittings for Polyethylene/ Aluminum/Polyethylene and Crosslinked Polyethylene/ Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
IGC 117 | Water Closet Riser Assemblies |
IGC 118 | Flushing Siphons for Water Closet Tanks |
IGC 121 | PVC Plastic Valves for Cold Water Distribution Systems Outside a Building and CPVC Plastic Valves for Hot and Cold Water Distribution Systems |
IGC 123 | Solenoid Type Water Control Valves |
IGC 124 | Point-of-Use and Branch Water Sub-Metering Systems |
IGC 125 | FOG (Fats, Oils & Greases) Disposal Systems |
IGC 126 | Non-Mechanical Waste and Overflow Devices |
IGC 129 | Hydraulically Powered Household Food Waste Disposers |
IGC 130 | Remote Floor Box Industrial Water Supply, Air Supply, Drainage |
IGC 131 | Automatic Self-Disinfecting Commercial Water Closet |
IGC 133 | Hot Water Circulating Devices Which Do Not Use a Pump |
IGC 134 | Flashing and Stand Combination for Residential Air Conditioning Units (Residential Curb Unit) |
IGC 135 | Cross-Linked Polyethylene (PEX) Tubing Sizes from 2-1/2 Inches (63 mm) Through 4 Inches (110 mm) |
IGC 137 | Press Type Copper Fittings for Installation on Copper Tubing |
IGC 138 | Air Gap Drains for Commercial Kitchen Sinks |
IGC 139 | Performance of Automatic Grease/Oil Removal Devices with Automatic Solids Transfer Feature (GRD-AST) |
IGC 140 | Water Energized Sump Pump |
IGC 141 | Aquatic Therapy Pools |
IGC 142 | Whirlpool Bathtubs Fillable through the Whirlpool Piping System |
IGC 143 | Sanitary Flooring System |
IGC 144 | Floor Drain Gas Traps |
IGC 145 | Brass Valves and Fittings with Ring Joint Connection |
IGC 146 | Floor and General Purpose Drains with Metal, ABS, and PVC Components |
IGC 148 | Cast In Place Polyethylene Low Pressure Pipe Seals for OEM Septic Tank and Distribution Box Applications |
IGC 149 | Performance of Engineering Thermoplastics Materials (Injection Molding and Extrusion Grades) Suitable for Kitchen and Bath Applications (Type I and III Materials Only) |
IGC 150 | Vacuum Sewage, Grease Waste and/or Condensate Collection Systems |
IGC 151 | HDPE Plastic Valves for Cold Water Distribution Systems Outside a Building |
IGC 152 | In-Line Sanitary Conditioning Systems for Flushometer Valve Operated Fixtures |
IGC 153 | Plastic Drainage Panels |
IGC 155 | Pipeless Whirlpool Bathtub Appliances |
IGC 157 | Ball Valves |
IGC 160 | Safety Vacuum Release System (SVRS) Devices for Residential and Commercial Swimming Pool, Spa, Hot Tub, and Whirlpool Suction Systems |
IGC 164 | Dual Containment Piping Systems for Acid Waste and Special Waste Applications |
IGC 165 | ABS (Acrylonitrile-Butadiene-Styrene) or PVC (PolyVinylChloride) Combination Plastic Toilet Fitting and Flange for Connecting Water Closet to the Drainage System |
IGC 169 | Combination Residential Dishwasher/Sink Units |
IGC 170 | Relief Valve for Use on Backflow Preventers |
IGC 171 | Air Jetted Laundry Tub |
IGC 172 | Glass Lavatories, Sinks and Counter Tops |
IGC 173 | PVC-DWV Fire Stop Fittings |
IGC 175 | One Time Use Water Heater Emergency Shut-Off Devices |
IGC 176 | Compression Fittings for PEX-AL-PEX Tubing |
IGC 177 | Water Closets with Automatic Seat and Automatic Seat Cover Dispenser |
IGC 179 | Water Mixing Systems for Emergency Showers and Eyewashes |
IGC 182 | Automatic Hair Washers |
IGC 185 | Continuous Ribbed (Unitary Extruded) Dual Containment Piping Systems for Acid Waste and Special Waste Applications |
IGC 186 | Bathroom Accessories |
IGC 188 | Removable and Non-Removable Push Fit Fittings |
IGC 190 | Air-Base Solar Thermal Collector |
IGC 191 | Grade Level Yard Hydrant and Hose Storage Chamber |
IGC 192 | Plastic Acrylontrile-Butadiene Styrene (ABS) and Poly (VinylChloride) (PVC) Drain, Waste and Vent (DWV) Pressure Test Fittings for Use in ABS, PVC or Cast Iron DWV Piping Systems |
IGC 194 | Copper Alloy or Aluminum Alloy Sinks and Lavatories |
IGC 195 | Shower Drains with Integrated Bonding Flanges |
IGC 197 | Mounting Brackets for Single Handle Tub/Shower Valves |
IGC 199 | Drain Rock Replacement Materials Used in Septic Leach Disposal Systems |
IGC 203 | Self Sealing Waterless Waste Valve |
IGC 204 | Rupture Prevention Devices for Wall Hydrants |
IGC 205 | ABS or PVC Piping Systems Intended for Limited Chemical Waste Drainage Systems |
IGC 206 | Emergency Shut Off Device for Non Potable Water Systems |
IGC 207 | Reclaimed Water Conservation System for Flushing Toilets |
IGC 208 | Drain Tailpiece-Insert |
IGC 209 | Odor Removing Air Filters for Terminal Vent Pipes |
IGC 210 | Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Limited Chemical Waste Drainage Systems |
IGC 211 | Flexible Water Connectors with Excess Flow Shutoff Device |
IGC 213 | Closed-Loop Biological Wastewater System |
IGC 215 | Solderless Bonding Adhesive for Copper Piping Water Systems |
IGC 216 | Freeze Free Faucet |
IGC 217 | Metallic Bathtubs, Shower Pans and Whirlpool Bathtubs |
IGC 218 | Sink Outlet Dual Screening Device |
IGC 220 | Breathing Air Replenishments Systems (BARS) |
IGC 221 | Solvent Cement for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Limited Chemical Waste Drainage Systems |
IGC 222 | Water Closet Seat Lifter |
IGC 223 | Polypropylene-Aluminum-Polypropylene Multilayer Piping Systems for Hot and Cold Water |
IGC 228 | Polyethylene of Raised Temperature (PE-RT) Tubing |
IGC 229 | Vertical PVC Backwater Preventers |
IGC 231 | Factory Assembled Septic Tank Kits |
IGC 232 | PVC Valve with Integral Ball and Spring-Check or Swing-Check Features |
IGC 238 | Bio Hazard Disposal Device |
IGC 240 | Load Pads for Air Conditioning Units |
IGC 242 | Polypropylene Inspection Chambers (PPIC) |
IGC 243 | Chlorinated Poly (Vinyl Chloride)-Aluminum-Chlorinated Poly (Vinyl Chloride) (CPVC-AL-CPVC) Tubing and Fittings |
IGC 245 | Wastewater Interceptor System (WIS) for an Interactive Mechanical Wastewater Interceptor |
IGC 246 | Grease Traps with Outer Retention |
IGC 247 | Water Closet with Mechanical Trap |
IGC 249 | Floor Drain with Integrated Closet Flange |
IGC 251 | Structural Adhesive Fitting Systems For Joining PVC, CPVC, ABS PP, PE, PEX, and Copper Tubing |
IGC 253 | Malleable Cast Iron Fittings with Mechanical Press Connections for Steel Pipe |
IGC 254 | Stainless Steel Industrial Commercial Sinks |
IGC 256 | Residential Sinks with Integrated Rinsing Outlets |
IGC 257 | Hinge Type Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings |
IGC 258 | Low Flow Laundry Faucet |
IGC 259 | Drainage Line Backup Detection Device |
IGC 265 | PVC Reinforcement Ring for DWV Joints |
IGC 266 | Polyethylene of Raised Temperature Multilayer Piping Systems for Hot-and Cold-Water |
IGC 268 | Copper Alloy Left or Right Threaded Connectors |
IGC 271 | Flow Regulating Device |
IGC 273 | Hydromechanical Grease Interceptors Rated Over 100 GPM |
IGC 274 | Whirlpool Bathtub with Pressure Sealed Door and Drainage Tank |
IGC 275 | Stainless Steel Drainage Systems with Alternate End Connections |
IGC 279 | Floor Level Water Closet |
IGC 282 | Inline Sewer Dosing Units |
IGC 283 | Electro-Pneumatic Backwater Prevention Systems |
IGC 284 | Stainless Steel Tanks without Heat Exchangers Intended for Pressure and Non-Pressure Applications |
IGC 311 | Hybrid Urinals with High‐Efficiency Drain‐Cleansing Feature |
PS 2 | Cast Brass and Tubing P-Traps |
PS 4 | Drains for Prefabricated and Precast Showers |
PS 14 | Flexible Metallic Field Fabricated Water Connectors |
PS 16 | Subdrains For built-Up Shower Pans |
PS 25 | Metallic Fittings for Joining Polyethylene Pipe For Water Service and Yard Piping |
PS 31 | Backflow Prevention Assemblies |
PS 33 | Flexible PVC Hose for Pools, Hot Tubs, Spas and Jetted Bathtub |
PS 38 | ABS and PVC Backwater Valves |
PS 39 | Testing Mechanical Fittings Composed of Multiple Components for Various FittingConfiguration for Use with Thermoplastic Gas Pressure Pipe |
PS 40 | Anodeless Transition Riser for use with Polyethylene and PVC Gas Yard Piping |
PS 41 | Copper and Other Metallic Roof/Deck/Balcony Drains |
PS 43 | Cushioned Bathtubs and Whirlpool Bathtub Appliances |
PS 44 | Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground |
PS 45 | Bathtub Three-Way Diverter Valves with Backflow Protection |
PS 46 | Field-Assembled Tiling Kits |
PS 47 | Plastic Rook Drains |
PS 48 | Material Safety Data Verification for Plumbing Products |
PS 49 | Backflow Prevention Requirements for Fixture Fittings with Hose Connected Singular moveable Outlets |
PS 57 | PVC Hydraulically Actuated Diaphragm Type Water Control Valves |
PS 58 | Supports for Off-The-Floor Plumbing Fixtures with or without Concealed Tanks |
PS 60 | Sewage Holding Tank Containing Sewage Ejector Pump for Direct Mounted Water Closet |
PS 61 | Fabricated Stainless Steel Water Closets or Urinals |
PS 70 | Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors |
PS 71 | Electronic Controlled Showers |
PS 74 | Reinforced Flexible Water Connectors |
PS 75 | Proportional Chemical Dispensers with Backflow Protection |
PS 77 | Electrohydraulic Water Closets |
PS 78 | Dual Flush for Electrohydraulic and Gravity 6 Liter (1.6 Gallons) Water Closet |
PS 82 | Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Fittings |
PS 88 | Pre-Pressurized Water Expansion Tanks |
PS 89 | Soaking and Hydrotherapy (Whirlpool) Bathtubs with Hydraulic Seatlift |
PS 93 | Water Closets with Spray, Water Closet Seats with Spray and Other Devices with Spray for Water Closet Supplied with Hot and Cold Water |
PS 96 | Passive Direct Solar Water Heaters |
PS 98 | Prefabricated Fiberglass Church Baptisteries |
PS 99 | Terrazzo, Marble, Concrete, Granite, and Slate Plumbing Fixtures |
PS 100 | Porous Filter Protector for Sub-Drain Weep Holes |
PS 102 | Pedestal Lavatory Trap |
PS 103 | Water Heater Stands With or Without Pans |
PS 105 | Polyethylene Distribution Boxes |
PS 109 | Rigid Unshielded Mechanical Couplings for use Plain end Drain, Waste, and Vent (DWV) Pipe and Plain End Sewer Pipe |
PS 113 | Hydraulically Powered Household Food Waste Disposers |
PS 114 | Remote Floor Box Industrial Water Supply, Air Supply, Drainage |
PS 116 | Hot Water Circulating Devices which do not use a Pump |
PS 118 | FOG (Fats, Oils & Greases) Disposal Systems |
SPS 5 | Water or Air Jet Fittings |